Explore Careers - Job Market Report

in
Plastic Products Assemblers, Finishers and Inspectors  (NOC 9495)
Laurentides Region
Description |  Titles |  Duties |   Related Occupations

This unit group includes workers who assemble, finish and inspect plastic parts and finished products. They are employed by plastic products manufacturing companies and plastic parts divisions of aircraft or other manufacturing companies.

fibreglass laminator, plastic bottle trimmer, plastic parts assembler, plastic products fabricator, plastic products inspector and tester, plastic tank assembler, plastics assembler, plastics inspector, plastics trimmer, skylight assembler.

Plastic products assemblers and finishers perform some or all of the following duties:
  • Operate machines or equipment, or use hand tools to cut, shape, splice and fit plastic materials to form parts and assemblies
  • Assemble composite materials on patterns to form parts and assemblies using bonding agents
  • Operate spray-gun unit to apply resin mixtures to metal or wooden mould to form plastic products
  • Load and operate autoclave oven to cure and bond plastic parts and subassemblies
  • Operate finishing equipment to trim, grind or buff plastic products into final form.
Plastic products inspectors perform some or all of the following duties:
  • Inspect manufactured plastic products for defects and conformance to specifications and quality standards, visually or using instruments
  • Affix seals or tags to approved plastic products and mark and reroute defective products for repair or recycle
  • Prepare reports on products inspected
  • Make minor adjustments and repairs to products.
Included Cities in Region | Service Canada Offices

Lafontaine, Mont-Laurier, Riviere-Rouge, Saint-Antoine, Sainte-Adèle, Sainte-Agathe-des-Monts, Sainte-Anne-des-Plaines, Saint-Jérôme, Saint-Jovite, Lachute, Saint-Augustin

View a list of Service Canada offices in this area.

Outlook & Prospects for Plastic Products Assemblers, Finishers and Inspectors in Laurentides Region

The future forecast and current conditions for an occupation can vary based on location or due to changes in the economy, technology, or demand for a product or service.

Provincial Employment Potential Information

The following table identifies employment conditions within Québec.

Table on the employment potential for Plastic Products Assemblers, Finishers and Inspectors in Laurentides Region as well as in the rest of the Québec.
Location Employment Potential Release Date
Abitibi-Témiscamingue Region <Not assigned> 2010-01-04
Bas-Saint-Laurent Region <Not assigned> 2011-11-09
Capitale-Nationale Region Fair 2012-10-22
Centre-du-Québec Region Fair 2012-12-03
Chaudière-Appalaches Region Fair 2012-11-27
Côte-Nord Region <Not assigned> 2012-12-12
Estrie Region Fair 2012-11-14
Gaspésie -- Îles-de-la-Madeleine Region <Not assigned> 2010-12-31
Lanaudière Region Fair 2012-11-26
Laurentides Region Fair 2012-11-06
Laval Region Fair 2011-10-24
Mauricie Region Limited 2012-11-23
Montérégie Region Fair 2012-10-30
Montréal Region Fair 2012-12-12
Nord-du-Québec Region N/A N/A
Outaouais Region <Not assigned> 2012-10-15
Saguenay--Lac-Saint-Jean Region <Not assigned> 2012-11-27

Additional Provincial Prospects

Visit the Provincial Job Futures for information on the current trends and the future outlook for occupations in this province or territory. This Web site is a joint effort of the federal, provincial and territorial governments. You can view a report specific to this occupation on: Provincial Job Futures - (Employment Prospects section) Web Site.

Labour Market Bulletins

An analysis of the local labour market and an assessment of local employment-related events.

Provincial / Territorial Labour Market News

Week of May 06 – May 10, 2013

Week of Apr 29 – May 03, 2013

Week of Apr 22 – Apr 26, 2013

Week of Apr 15 – Apr 19, 2013

Please consult the Laurentides Region and Canada tabs for more useful information related to outlook.