Explore Careers - Job Market Report

in
Foundry Workers  (NOC 9412)
Outaouais Region
Description |  Titles |  Duties |   Related Occupations

This unit group includes workers who make foundry moulds and cores by hand or machine, cast molten metal, and operate furnaces in the foundry industry. They are employed by metal foundries and foundry departments of metal products manufacturing companies.

bench moulder, casting machine operator, ceramic mouldmaker, die-casting machine operator, foundry worker, furnace operator – foundry, machine coremaker, manual moulder, melter – foundry, metal caster, pit moulder, sand coremaker, sand moulder.

The following is a summary of the main duties for some occupations in this unit group:
  • Manual mouldmakers make and repair sand moulds using patterns, moulding boxes, sand and hand tools following bench, floor or pit moulding methods; operate ovens to dry moulds; may pour molten metal into moulds to produce metal castings.
  • Manual coremakers make cores for use inside moulds to form holes or void spaces in castings using core boxes, sand, hammer and wire or other reinforcing material; coat cores with protective materials and bake cores in oven.
  • Machine mouldmakers and coremakers set up, adjust and operate various mouldmaking and coremaking machines to make sand and ceramics moulds and cores.
  • Metal casters set up and operate various casting machines to cast ferrous and non-ferrous metal products; hand ladle and pour molten metal into moulds to produce castings.
  • Foundry furnace operators operate furnaces used to melt metals for moulding and casting.
Included Cities in Region | Service Canada Offices

Gatineau, Buckingham, Hull, Maniwaki, Masson-Angers, Thurso, Aylmer, Angers, Bassin-du-Lièvre, Beauchampville, Mont-Cascades

View a list of Service Canada offices in this area.

Outlook & Prospects for Foundry Workers in Outaouais Region

The future forecast and current conditions for an occupation can vary based on location or due to changes in the economy, technology, or demand for a product or service.

National Outlook – 10-Year Projection (2011-2020)

This section provides labour demand and labour supply projections for this occupation over the 2011-2020 period.

Note: The tables, graphs and middle paragraph shown under this section display updated 2011-2020 projection results. The remaining narrative text (2009-2018 projections) will be updated shortly. We apologize for the inconvenience.

The data in the following table are derived from HRSDC’s Canadian Occupational Projection System (COPS). COPS uses a variety of models to produce a detailed 10-year labour market projection per broad skill level and per occupation at the national level, which focuses on the trends of labour supply and labour demand over the next ten years.

This occupation (Foundry Workers) is part of a larger occupational group called Machine Operators and Related Workers in Metal and Mineral Products Processing (NOC 941).

Table on the demographic profile for your chosen occupation at the national level.
Occupations in this group Machine Operators, Mineral and Metal Processing (9411) 
Foundry Workers (9412) 
Glass Forming and Finishing Machine Operators and Glass Cutters (9413) 
Concrete, Clay and Stone Forming Operators (9414) 
Inspectors and Testers, Mineral and Metal Processing (9415) 
Employment (non-student) in 2010 24,351
Median Age of workers in 2010 42
Average Retirement Age in 2010 63

Occupation Projection for Canada

Over the 2008-2010 period, this occupation experienced a significant drop in employment while its unemployment rate, one of the highest for the 140 occupations, increased more quickly than the average to reach 18% in 2010. The average hourly wage for this occupation stagnated over this period. The average hourly wage continued to be the highest of the processing and manufacturing machine operators and assemblers occupations (NOCs 94 and 95). According to key labour market indicators, the number of job seekers was more than sufficient to fill the job openings in this occupation.

Over the 2011-2020 period, an occupation will be in excess demand (a shortage of workers) if the projected number of job openings is significantly greater than the projected number of job seekers. An occupation will be in excess supply (a surplus of workers) if the projected number of job openings is smaller than the projected number of job seekers. For Machine Operators And Related Workers In Metal And Mineral Products Processing, over the 2011-2020 period, job openings (arising from expansion demand and replacement demand) are expected to total 10,600 and 12,857 job seekers (arising from school leavers, immigration and mobility) are expected to be available to fill the job openings.

Based on projections and considering that there was surplus labour supply in this occupation, it is expected that labour supply will exceed labour demand over the projection period. In other words, the number of job seekers will be greater than the number of job openings. Retirements will account for the majority of job openings. The retirement rate in this occupation will be on par with the average for all occupations. Employment growth will be very weak over the coming years, meaning that expansion demand will contribute very little in terms of job openings. Despite everything, this will be an improvement over the ten years prior to the projection period when employment dropped. During this period, job losses in this occupation were observed, especially between 2005 and 2008, as a result of the difficulties in the mineral manufacturing industry and, more specifically, in the iron, steel and aluminum industries. Several metal processing plants closed their doors or laid off workers during this period. The closure of the least productive plants as well as the resuming of economic activity in the United States over the coming years will enable employment to stabilize in these sectors. With regard to labour supply, job seekers will come from both the school system and other occupations. Workers in other occupations will be attracted to this occupation by the highly competitive wages in comparison to other occupations that do not generally require a post-secondary education.

This Chart contains data for Projection of Job Openings vs. Job Seekers for Canada. Information is available in the following tables.

This Chart contains data for Projection of Job Openings vs. Job Seekers for Canada. Information is available in the following tables.
Table of job opening projections for the occupational group containing your chosen occupation.
Category Openings %
Expansion Demand 3,397 32%
Retirements 5,989 56%
Other Replacement Demand 663 6%
Emigration 551 5%
Projected Job Openings 10,600 100%
Table of job seeker projections for the occupational group containing your chosen occupation.
Category Seekers %
School Leavers 5,165 40%
Immigration 2,490 19%
Other 5,202 40%
Projected Job Seekers 12,857 100%

In which industry or sector do people in this occupation find jobs in Canada?

This table shows the industry and sectors employing the highest number of people in this occupation.

This table shows the industry sectors employing the highest number of people in this occupation.
Industry / Sector %
Manufacturing 95.10

What percentage of people in this occupation are self-employed?

The graph displays the percentage of people in this occupation who are “self-employed”, according to the 2006 Census, in comparison to the Canadian average across all occupations.

As shown in the graph, according to the 2006 Census, 2% of people in this occupation were self-employed, while the average for all occupations was 12%.

The data from the Labour Force Survey (2009) regarding self-employment for this group are not sufficiently reliable to be published.

What percentage of people in this occupation are members of a union?

This occupation (Foundry Workers) is part of a larger group called Machine Operators and Related Workers in Metal and Mineral Products Processing (NOC 941). According to the Labour Force Survey (2009), the unionization rate for this group was 49%, while the unionization rate for all occupations was 31%.

Please consult the Outaouais Region and Québec tabs for more useful information related to outlook.